Question:
How do I put on my RV Rooftop Cover?
Answer:
WARNING! Never install your RV Rooftop Cover alone or in inclement weather. Never install your RV Rooftop Cover when the RV is wet. PLEASE TAKE CARE when you are on a ladder or on the roof of your RV.
IMPORTANT! Installation and removal is safer and easier when done by two people capable of heavy lifting.
PLEASE NOTE! The RV Rooftop Cover cannot be used while the RV is lived in or in use since the cover may go over the A/C intake and exhaust vents. Additionally, the rooftop cover may also prevent doors from opening and not allow emergency exiting.
- First, remove or detach any roof antennas. Other accessories like satellites, horns, and air conditioners are ok to keep on the RV as long as there are no sharp points that could puncture the cover.
- Next, lay the cover over the top of your RV roof. Take the bungee cords and clips that were included with the cover and attach them to the ends of your cover.
- Clip the bungee cords and clips to secure points on the side or underneath your vehicle. Do not overstretch.
- To remove, unclip the bungees on one side and roll the cover over the top of the RV to the end.