Question:
I have an antenna on my car. What do I do?
How do I install an antenna patch?
Answer:
Each cover, with the exception of the Indoor Luxury Car Cover, comes with two 1" x 1" adhesive reinforcing patches to use when creating a hole for the antenna. If your antenna does not retract, you will want to unscrew the antenna the first time you put on the cover.
After installing the cover, locate the antenna mount and put a mark on the cover where you will need the antenna to pass through. Then remove the cover and make a small hole in the cover at your mark and adhere a patch on the inside and outside of the cover to reinforce the hole.